13313028229联系我们
名称：保定市石墨铜套厂
电话：xxx
手机：13313028229
邮箱：xxx
地址：xxx
新闻动态
如何使用法兰铜套
如何使用法兰铜套
How to Use Flange Copper Sleeve
1、安装时要认真仔细，不允许强力冲压，不允许用锤直接敲击轴承，不允许通过滚动体传递压力。
1. When installing, we should be careful, forceful stamping is not allowed, hammer is not allowed to directly hit the bearing, and pressure is not allowed to be transmitted through the rolling element.
2、使用合适、准确的安装工具，尽量使用专用工具，避免使用布类和短纤维之类的东西。
2. Use appropriate and accurate installation tools, try to use special tools, avoid using cloth and staple fibers and other things.
3、尽量保持直铜套及其周围环境的清洁，即使肉眼看不见的微笑灰尘进入直铜套，也会增加直铜套的磨损，振动和噪声。
3. Keep the straight copper sleeve and its surroundings as clean as possible. Even if the invisible smiling dust enters the straight copper sleeve, it will increase the wear, vibration and noise of the straight copper sleeve.
4、为了预防直铜套的锈蚀，用手拿取轴承时，要充分洗去手上的汗液，并涂以矿物油后再进行操作，在雨季和夏季尤其要注意防锈。
4. In order to prevent the rust of straight copper sleeve, when taking bearings by hand, sweat should be thoroughly washed off, and mineral oil should be applied before operation. In rainy season and summer, special attention should be paid to rust prevention.
How to Use Flange Copper Sleeve
1、安装时要认真仔细，不允许强力冲压，不允许用锤直接敲击轴承，不允许通过滚动体传递压力。
1. When installing, we should be careful, forceful stamping is not allowed, hammer is not allowed to directly hit the bearing, and pressure is not allowed to be transmitted through the rolling element.
2、使用合适、准确的安装工具，尽量使用专用工具，避免使用布类和短纤维之类的东西。
2. Use appropriate and accurate installation tools, try to use special tools, avoid using cloth and staple fibers and other things.
3、尽量保持直铜套及其周围环境的清洁，即使肉眼看不见的微笑灰尘进入直铜套，也会增加直铜套的磨损，振动和噪声。
3. Keep the straight copper sleeve and its surroundings as clean as possible. Even if the invisible smiling dust enters the straight copper sleeve, it will increase the wear, vibration and noise of the straight copper sleeve.
4、为了预防直铜套的锈蚀，用手拿取轴承时，要充分洗去手上的汗液，并涂以矿物油后再进行操作，在雨季和夏季尤其要注意防锈。
4. In order to prevent the rust of straight copper sleeve, when taking bearings by hand, sweat should be thoroughly washed off, and mineral oil should be applied before operation. In rainy season and summer, special attention should be paid to rust prevention.
