| 铜套材质如下: |
| 添加时间：2019/10/24 16:23:00 浏览次数： |
| 铜套材质如下: The copper sleeve material is as follows: ZCuSn10Pb1 ZCuSn10Pb1 硬度高，耐磨性极好，不易产生咬死现象，有较好的铸造性能和切削加工性能，在大气和淡水中有良好的耐蚀性。 High hardness, excellent wear resistance, not easy to produce the phenomenon of seizing, good casting performance and cutting performance, good corrosion resistance in the atmosphere and fresh water. 可用于高负荷(20Mpa以下)和高滑动速度(8m/s)下工作的耐磨零件，如连杆、衬套、轴瓦、齿轮、蜗轮等。 It can be used for wear-resistant parts working under high load (below 20MPa) and high sliding speed (8m / s), such as connecting rod, Bush, bearing bush, gear, worm gear, etc. ZCuSn10Pb5 ZCuSn10Pb5 耐腐蚀，特别对稀硫酸、盐酸和脂肪酸。 Corrosion resistance, especially for dilute sulfuric acid, hydrochloric acid and fatty acid. 结构材料，耐蚀、耐酸的配件以及破碎机衬套、轴瓦。 Structural materials, corrosion-resistant and acid resistant accessories, as well as crusher bushing and bearing bush. ZCuPb10Sn10 ZCuPb10Sn10 润滑性能，耐磨性能和耐蚀性能好，适合用作双金属铸造材料。 Good lubricity, wear resistance and corrosion resistance, suitable for bimetal casting material. 车辆用轴承，负荷峰值达100Mpa的内燃机双金属轴瓦，以及活塞销套，磨擦片等。 Bearings for vehicles, bimetallic bearing shells for internal combustion engines with a peak load of 100MPa, as well as piston pin sleeves, friction plates, etc. |
| 上一页 如何使用法兰铜套 |
| 下一页 如何使用法兰铜套 |
Copyright © 技术支持：遨游网络