| 法兰铜套 |
| 添加时间：2020/9/9 16:03:58 浏览次数： |
| 法兰又叫法兰凸缘盘或突缘。法兰是轴与轴之间相互连接的零件，用于管端之间的连接；也有用在设备进出口上的法兰，用于两个设备之间的连接，法兰铜套一法兰边的铜套 Flange is also called flange, flange plate or flange. Flange is a part of shaft to shaft connection, which is used for the connection between pipe ends. It is also used for the connection between two equipment at the inlet and outlet of equipment. The flange copper sleeve is a copper sleeve with French flange 法兰铜套又叫翻边铜套，翻边铜套有自润滑的，也有不是自润滑的。自润滑轴承有翻边的，也有不翻边，具体可根据使用要求来设计轴承。 Flange copper sleeve is also called flanging copper sleeve, which has self-lubricating and non self-lubricating. Self lubricating bearings have flanging or no flanging. The bearing can be designed according to the use requirements. 广义上来讲翻边轴套和自润滑轴承都属于滑动轴承，这是它们的共同点。翻边是无油衬套的一种，有一端是外翻带法兰的。 Generally speaking, flanging sleeve and self-lubricating bearing belong to sliding bearing, which is their common point. Flanging is a kind of oil-free bushing, one end is turned out with flange. 有边铜套的标准就是带法兰的；无边的就是不带法兰的那种铜套。衬套和轴套是根据不同工况条件选用不同的型号。主要的条件是：压力、速度、压力速度乘积、润滑状态、载荷性质。旋转不锈钢卷制衬套运动和轴向滑动的要求不一样，有没有润滑油性能差别也很大，速度和压力基本上决定了轴套寿命。 The standard of copper sleeve with edge is flange; the copper sleeve without flange is that without flange. Different models of bushing and sleeve are selected according to different working conditions. The main conditions are: pressure, velocity, pressure velocity product, lubrication state, load property. The requirements of movement and axial sliding of rotating stainless steel rolling bush are different, and the performance of lubricating oil is also very different. The service life of shaft sleeve is basically determined by speed and pressure. 大型法兰铜套在我们的日常生活中是很常见的，一些转接和密封接口的地方是经常会用到的，一些小的法兰铜套大家可以很简单的安装成功，但是一些大型的法兰铜套的安装注意事项大家不一定都知道了吧。 Large flange copper sleeve in our daily life is very common, some of the adapter and sealing interface is often used, some small flange copper sleeve you can be very simple installation success, but some large flange copper sleeve installation precautions we do not necessarily know it. 法兰铜套因为其材质为铜，所以它只要尺寸大点，就会使法兰铜套的重量增加很多，也导致了它的安装比较困难，我们在安装的时候一定要认真仔细，不可以强行安装，更不允许使用大锤敲打，在一个就是我们安装时候的工具的选择，选择一个合适的工具才可以更好的安装好法兰铜套，还有就是我们的法兰铜套安装环境了，环境的清洁直接导致我们的法兰铜套能不能安装成功，严重还会影响它的使用寿命的。 Because the flange copper sleeve is made of copper, as long as its size is larger, the weight of the flange copper sleeve will increase a lot, which also makes its installation more difficult. We must be careful in the installation, and we can't force the installation, let alone use a sledge hammer to strike. One is the choice of tools when we install. We can choose a suitable tool Good installation of the flange copper sleeve, there is our flange copper sleeve installation environment, environmental cleaning directly leads to our flange copper sleeve can be installed successfully, seriously will affect its service life. |
| 上一页 石墨铜套主要是以高强度铜合金为基体，那么石墨铜套的特点是什么呢？ |
| 下一页 石墨铜套 |
Copyright © 技术支持：遨游网络